The MODULAB® High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18.2 Mω cm @ 25 °C) with flow rates up to 14 lpm (3.7 gpm) of pretreated water. The MODULAB High Flow system is a wall- mountable unit that requires a minimal footprint for installation. This product does not come with an inlet pressure regulator.
The system is offered in three configurations:
The MODULAB® High Flow water system is a modular, point-of-use polishing system which consistently provides high quality Type 1 water (up to 18.2 Mω cm @ 25 °C) with flow rates up to 14 lpm (3.7 gpm) of pretreated water. The MODULAB High Flow system is a wall- mountable unit that requires a minimal footprint for installation. This product does not come with an inlet pressure regulator.
The system is offered in three configurations:
The MODULAB High Flow is delivered fully assembled and functionally tested. Cartridges and inlet pressure regulator will need to be purchased separately and should be installed after the system has been safely mounted.
With Organic Removal Cartridge installed and RO (reverse osmosis) feed water.
** With Sub-micron filter installed as specified.
*** With UF (ultrafiltration) Filter Cartridge installed as specified. Note: Specifications are based on a RO feed.
